GZD Series Vibrating Feeder

GZD Series Vibrating Feeder

GZD Series Vibrating Feeder is also called vibration feeder is a kind of linear direction feeding equipment. Vibration characteristics of smooth state, reliable operation, long service life and suitable for feeding.Is widely used in mining, building materials, silicate and chemical industry in the crushing and screening plants. GZD Series Vibrating Feeder can be used in a wide range of applications, such as metallurgical industry, mining industry, mining, selecting, building, chemical and grinding industry, etc.

Detailed Introduction

Introduction To Vibrating Feeder

Vibrating feeder structure is simple, easy to operate, no lubrication, low power consumption; can be evenly adjusted to the ore; it has been widely used. Generally used for loose material. According to the equipment performance requirements, the design should be designed to minimize the pressure on the tank body, according to the requirements of the factory, the effective discharge of the warehouse material shall not be greater than one quarter of the width of the material flow velocity control in the 6-18m / min For materials with large feeding capacity, the bar at the bottom of the silo should be set with a sufficient height to prevent the performance of the feeder. The block can not be fixed on the tank. In order to allow the silo to be discharged smoothly, the posterior wall of the silo is preferably designed to be 55-65 degrees.Vibrating feeder is an automatic sorting feed device.

Technical Features And Advantages

  • 1. Flexible design;
  • 2. Extra heavy-duty construction;
  • 3. Exclusive vibrator technology;
  • 4. Good performance-conditioning, no flushing phenomenon of materials;
  • 5. Easy maintenance and low operating cost;
  • 6. Easy to change and control currency through adjusting excitation force;
  • 7. Sealing structure body is employed, no pollution.

Vibrating Feeder's Structural Features

Vibrating feeder structure is simple, easy to operate, no lubrication, low power consumption; can be evenly adjusted to the ore; it has been widely used. Generally used for loose material. According to the equipment performance requirements, the design should be designed to minimize the pressure on the tank body, according to the requirements of the factory, the effective discharge of the warehouse material shall not be greater than one quarter of the width of the material flow velocity control in the 6-18m / min For materials with large feeding capacity, the bar at the bottom of the silo should be set with a sufficient height to prevent the performance of the feeder. The block can not be fixed on the tank. In order to allow the silo to be discharged smoothly, the posterior wall of the silo is preferably designed to be 55-65 degrees.

Vibrating Feeder's Working Principle

Vibrating feeder composition: hopper, chassis, controller, linear feeder.Under the hopper there is a pulsed solenoid, you can make the bucket vertical vibration, due to the tilt of the spring, so that the bucket around its vertical axis to do torsional pendulum vibration. The parts of the hopper, due to this vibration, rise along the spiral track until they are sent to the discharge port. Vibrating feeder is an automatic sorting feed device. The purpose of its work is through the vibration of the workpiece will be ordered in an orderly and orderly, accurate delivery to the next process.

Vibrating feeder mainly by hopper, chassis, controller, linear feeder and other supporting composition. Vibrating feeder under the hopper has a pulsed electromagnet, can make the bucket vertical vibration, due to the tilt of the spring, so that the bucket around its vertical axis to do torsional pendulum vibration. The parts of the hopper, due to this vibration, rise along the spiral track until they are sent to the discharge port. Vibrating feeder hopper is divided into cylindrical hopper, spiral, wire hopper, cone hopper, equidistant hopper five; chassis is pulling the chassis, side pull the chassis, piezoelectric chassis, precision chassis four; For the general controller, the polar controller, FM controller, with a slow start controller, digital FM controller five; linear feeder can be customized according to customer demand for a variety of models of linear feeder can also be based on product requirements Order.

Technical Data

Model Trough Size (mm) Max Feeding (mm) Capacity (t/h) REV (r/min) Power (kw) Motor Model Machine Size (mm)
GZD 800x1800 1800×800 300 30-80 970 6-1.5×2   2200×1100×800
GZD 1200x2000 2000×1200 300 80-500 970 6-2.2×2   2000×1200×855
GZD 850x3000 3000×900 300 40-100 970 6-2.2×2   3050×1430×1550
GZD 960x3800 3800×960 500 90-200 710 6-11 Y160L-6/11 3880×2240×1880
GZD 1100x4200 4200×1100 580 150-350 710 6-15 Y180L-6/15 4300×2450×2010
GZD 1100x4900 4900×1100 580 180-380 780 6-15 Y180L-6/15 4980×2450×2010
GZD 1300x4900 4900×1300 750 250-450 780 6-22 Y200L2-6/22 4980×2710×2050
GZD 1500x6000 6000×1500 800 600-1000 780 6-30 Y255M-6/30 6160×2919×2293

Inquiry

Simply complete the form below, click submit, you will get the price list and a Zenith representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).